Close
Polyester resin and TGIC curing agent as the main raw materials.
PRODUCT FEATURES
Coating characteristics:
Good adhesion, excellent mechanical properties, tough coating film.
Smooth and smooth film
Good Outdoor endurance
Excellent resistance to excessive baking
Application:
Suitable for various outdoor products such as: outdoor lighting, beach chair, solar water heater,
outdoor air conditioning unit, aluminum curtain wall, door and window frame, ceiling, highway guardrail, fence, sports facilities, communication equipment, etc
Application parameters:
Curing time
200°Cx10--15 mins
Recommended film thickness :
60-80 um
Spraying method:
high voltage electrostatic sprayin 60-80KV
STANDARD TEST METHOD FOR ITEMIZER
In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um, and the performance index of the film would change slightly with different gloss.
This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium and other heavy metals, and meets RoHS requirements.
Storage conditions: dry at about 35C, stored in the ventilated room, avoid direct sunlight. Under these conditions, the powder can be stored for 12 months, product can still be used after re-examined to be in good condition even if it is found to be expired.
Note: All the test indicators mentioned in this report are the data obtained from laboratory tests for reference only and do not represent the performance. commitment of the product application.
The results vary with environmental factors and other conditions.
