采用无机抗菌剂制成,具有长期的抗菌性能,适用于室内外环境
特性:阻止大肠杆菌、黄曲霉、藤黄球菌、桔青霉、桔草芽月色杆菌、总状毛霉、皮状丝饱、紫红球菌等滋生
Made of inorganic antibacterial agent, with long-term antibacterial properties, suitable for indoor and outdoor environment Properties: - Prevent the breeding of Escherichia coli, aflatoxin, Gambococcus, Penicillium citrullus, Bacillus citrullus, trichoderma, dermatophyllus, rhodococcus
产品特性
PRODUCT FEATURES
产品性能:
长期性可达4N-5 N ( 99.99-99.999% )
Product performance:
long term Up to 4N- 5N(99.99-99 .999%)
用途:
厨具:洗碗机、炉具、橱柜等
家用电器:冰箱、冰柜、饮水机、微波炉等
医疗设备:医疗床等
Application:
kitchen utensils: dishwasher, stove, cupboard, etc
Household appliances: refrigerator, freezer, water dispenser, microwave oven, etc
Medical equipment: medical beds, etc
喷涂方式:
高压静电喷涂60-80KV
Spraying method:
high voltage electrostatic sprayin 60-80KV
建议膜厚:
60-80 um
Recommended film thickness:
60-80 um
应用参数:
固化时间:
200°Cx10--15分钟
Application parameters
Curing time
200°Cx10--15 mins
项目仪器标准测试方法
STANDARD TEST METHOD FOR ITEMIZER
In the above tests, 0.8mm cold rolled steel plates with oil and rust removal were used. The film thickness was 40 ~ 80um, and the, performance index of the film would change slightly with different gloss.
以上试验均采用0.8mm除油除锈冷轧钢板,涂膜厚度40 ~ 80um,涂膜的性能指标会随光泽不同稍有变化。
本产品不含砷、硒、铅、六价铬、汞、锑、镉、等重金属,且符合RoHS要求。
This product does not contain arsenic, selenium, lead, hexavalent chromium, mercury, antimony, cadmium and other heavy metals, and meets RoHS requirements .
贮存条件: 35C左右干燥、通风室内贮存,避免阳光直射,在此条件下,粉末可贮存6-12个月,如超期可重新检验,结果符合要求,仍可使用。
Storage conditions: dry at about 35°C, stored in the ventilated room, avoid direct sunlight. Under these conditions, the powder can be stored for 12 months, product can still be used after re- examined to be in good condition even if it is found to be expired.
说明:本报告中提及的各项测试指标,均为实验室检测所得出之数据仅供参考,不作为产品应用的性能承诺。
Note: All the test indicators mentioned in this report are the data obtained from laboratory tests for reference only and do not represent the performance commitment of the product application.
结果随环境因素及其它条件而会有变化。
The results vary with environmental factors and other conditions.